Front Bumper Fascia - Removal

REMOVAL





1. Remove air inlet push pin (4) and air-box fastener (2).





2. Remove grille push pins (2) and fascia fasteners (1) from grille.





3. Lift vehicle and on both the left and right remove two splash shield fasteners (1) and eight push pins.
4. Remove splash shields from vehicle.
5. Remove closeout panel Front Lower Fascia Closeout - Removal.





6. Slide fascia forward disengaging from push pins.
7. If equipped, disconnect fog lamp connectors.
8. Disconnect the side marker lamp electrical connectors.
9. Remove fascia from vehicle.