Checking a No Crank Condition

CHECKING A NO CRANK CONDITION

For a complete wiring diagram refer to the Wiring Information .
NO CRANK CONDITION

NOTE: Diagnose and repair any TIPM DTCs before continuing.

NOTE: Make sure the gear selector is in Park or Neutral.

NOTE: The battery must be fully charged and in good condition. An undercharged battery may produce invalid test results.

1. Attempt to start the engine.

Does the starter turn the engine over?

Yes

- Test complete.

No

- Refer to Electrical, Starting, Control Circuit Test and perform the appropriate procedure. Component Tests and General Diagnostics.