Fog Lamp Bulb - Removal

BULB

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.





1. Disconnect and isolate battery negative cable.
2. Loosen or remove the front lower fascia closeout enough to gain access to the back of the fog lamp. Front Lower Fascia Closeout - Removal.
3. Reach up behind the lower edge of the front fascia to access and disconnect the headlamp and dash wire harness connector from the front fog lamp bulb connector receptacle (1).
4. Firmly grasp the bulb by the two latch features (2) and squeeze them together to unlock the bulb from the back of the front fog lamp housing (3).
5. Pull the bulb straight out from the keyed opening in the housing.