Instrument Panel Pad - Installation

INSTALLATION






NOTE: If replacing the top pad, transfer the passenger airbag to the new top pad Passenger Air Bag - Installation .

1. Place instrument panel top cover in position on vehicle.
2. Push top cover forward and firmly push down to engage clips to instrument panel.
3. Install five top pad fasteners. Three located along the windshield, and two located beneath the passenger bezel.
4. Install the passenger airbag bolts to the instrument panel reinforcement Passenger Air Bag - Installation.
5. Install passenger bezel ensuring bezel clips snap firmly in place.
6. Install passenger bezel applique ensuring clips snap firmly in place.





7. Install defroster grille (1) Defroster Grille - Installation.
8. Install the instrument cluster center bezel. Instrument Panel Bezel - Installation.
9. Install speaker grille (1) ensuring tabs snap firmly in place.
10. Install A-pillar trim A-Pillar Trim Panel - Installation.