Passenger Trim Bezel

REMOVAL

1. Remove the right instrument panel end cover Instrument Panel End Cap - Removal.
2. Remove the center console bezel Shifter Bezel - Removal.
3. Remove instrument panel center bezel Instrument Panel Bezel - Removal.
4. Remove the lower glove box Instrument Panel Glove Box - Removal.
5. Remove the retaining screws to the passenger side trim bezel.
- Two under end cap
- Four inside glove box opening
- One in center bezel opening

CAUTION: When removing the passenger side trim panel, you must slightly pry out on the front console side panels enough to release the trim panel.

6. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the passenger trim bezel and remove.