Convertible Top Header Latch Striker Plate - Installation

INSTALLATION





1. Place into position the striker plate on the folding top.
2. Loosely install the three retaining fasteners.
3. Close the convertible top and latch.
4. Tighten the two mounting fasteners (1) that are visible with the top latched.
5. Open the top to the vertical position.
6. Tighten the remaining fastener (2) on each striker.
7. Tighten all fasteners to 15 N-m (11 ft. lbs.).
8. Install the front headliner. Convertible Top Headliner - Installation.
9. Cycle the top from full open to full close and latch the top to verify proper operation.