Tonneau Retracted Switch - Removal

REMOVAL





1. Put decklid in the service position, Convertible - Decklid Service Position.
2. Using a diagnostic scan tool, enter the "Power Folding Top Misc. Functions". Select the "Manual Top Movement" menu and manually activate the tonneau drive motor to the tonneau fully extended position.
3. Disconnect and isolate the battery negative cable.
4. Disconnect the tonneau retracted limit switch electrical connector (5).
5. Remove the two switch retaining screws (6).
6. Separate the switch (2) from the four bar linkage (2) and remove it from the vehicle.