Wiper Blades - Removal

REMOVAL





The wiper blade used on this model is a new design. There is not vertebrae or sub-structure, just a one piece, molded rubber blade with a unique latching mechanism.





1. Lift wiper arm to raise blade off glass.
2. Grasp around the blade at (2) and press together. With the other hand gently lift the locking cover (1) upward.




3. Slide the blade (2) off the wiper arm (1). Slide the blade toward the wiper arm pivot.




4. Pull the wiper arm (1) back through the locking cover (2).