Description

DESCRIPTION

WARNING: Due to propeller shaft imbalance concerns, the propeller shaft can only be serviced as an assembly.

AWD models utilize a "three-piece" propeller shaft to transmit torque to the rear driveline module assembly. This three-piece design consists of:

- Front center and rear shaft segments
- Plunging front CV joint.
- Center support bearings
- Rubber coupler at driveline module flange

The front shaft segment utilizes a plunging CV joint at the power transfer unit connection. The center and rear shaft segments utilize a support bearing/bracket assembly. The rear shaft segment uses a rubber coupler at the driveline module flange.