Rear Stabilizer Bar - Removal

REMOVAL

NOTE: Before proceeding, Rear Suspension.

1. Raise and support the vehicle. Maintenance




2. On each side of the vehicle, while holding the stabilizer bar link upper stud stationary, remove the nut (5) securing the link (2) to the stabilizer bar (1).
3. If equipped with all-wheel-drive, remove the rear driveline module. Removal




4. On each side of the vehicle, remove the screws (1) securing the stabilizer bar retainer (5) to the crossmember.
5. Remove the two stabilizer bar retainers.
6. Remove the stabilizer bar (3) from the vehicle.
7. If required, remove the two cushions (bushings) from the stabilizer bar utilizing the slit cut into the cushions.