Supply Hose - 3.5L Engine

3.5L ENGINE

NOTE: Before proceeding, Service Precautions.

1. Siphon as much fluid as possible from the power steering fluid reservoir.




2. Remove the clamp (3) securing the supply hose (2) to the power steering pump supply fitting (4), then remove the hose from the supply fitting.




3. Remove the mounting screws (1) securing the coolant recovery container (4) in place.




4. Lift the coolant recovery container as high as its connected hoses will allow, then remove the clip (6) securing the supply hose to the coolant recovery container's lower mounting point.
5. Remove the hose clamp (1) securing the supply hose (2) to the power steering fluid reservoir (7). Slide the hose off the end of the reservoir fitting and remove from vehicle.