Vibration Damper - Removal

REMOVAL





1. Disconnect negative battery cable.
2. Raise vehicle on hoist.
3. Remove the Right engine mount. Engine Mount - Removal
4. Remove the right front wheel and accessory drive belt splash shield.
5. Remove accessory drive belt Accessory Drive Belt - Removal.
6. Suitably support the engine.
7. Remove the lower crossmember. Service and Repair
8. Low the engine.
9. Remove vibration damper bolt.
10. Use Special Tool 1023 puller (1) , and insert 9020-R (2), remove crankshaft damper.