Installation

INSTALLATION

LEFT SIDE HYDRAULIC LINES





1. At the hydraulic cylinder, insert the line end and slide the retaining clamp around the line end.




2. Position the hydraulic line in trunk and clip (1) the line into he trunk area.
3. Install the line into the retaining plate at the pump.
4. Install the bolts to the line retaining plate.




NOTE: Make sure to close the pump valve. The pump valve will be oriented horizontally when closed.

NOTE: The hydraulic system uses ARAL VITAMOL ZH-M fluid. When replacing components or topping off system due to leak, make sure to use only approved fluid. When adding fluid Convertible Top - Standard Procedure.

5. Install the spare tire cover/floor of the trunk.
6. Install the trunk side trim.
7. Install the rear trunk trim.
8. Connect the battery negative remote cable.
9. Bleed the hydraulic system.
10. Close the decklid,
RIGHT SIDE HYDRAULIC LINES





11. At the hydraulic cylinder, insert the line end and slide the retaining clamp around the line end.




12. Position the hydraulic line in trunk and clip (1) the line into he trunk area.
13. Install the line into the retaining plate at the pump.
14. Install the bolts to the line retaining plate.




NOTE: Make sure to close the pump valve. The pump valve will be oriented horizontally when closed.

NOTE: The hydraulic system uses ARAL VITAMOL ZH-M fluid. When replacing components or topping off system due to leak, make sure to use only approved fluid. When adding fluid Convertible Top - Standard Procedure.

15. Install the spare tire cover/floor of the trunk.
16. Install the trunk side trim.
17. Install the rear trunk trim.
18. Connect the battery negative remote cable.
19. Bleed the hydraulic system.
20. Close the decklid,