Removal

REMOVAL





1. Using a trim stick or equivalent, pry the retractor/seat back cover and remove.
2. Remove the rear seat cushion.Seat Cushion - Removal.
3. Remove the retaining bolt to the retractor and remove the retractor.
4. Unbolt the two outside top seat back retaining bolts and fold seat cushion forward.
5. Unbolt the bottom of the seat back from the floor and remove seat back assembly from vehicle.
6. Using a trim stick or equivalent, pry up on the armrest/cup holder and remove from the quarter trim panel.




7. Remove the one screw (1) from the quarter trim panel.




8. Using a trim stick or equivalent, gently pry out on the quarter trim panel (1) and remove from vehicle.