Installation

INSTALLATION





1. Route hood release cable (1) through hole in lower dash panel and along inner frame rail.
2. Engage rubber grommet to lower dash panel.
3. Engage push-in fastener attaching hood release cable to lower dash panel.
4. Install screws attaching hood release cable handle to inner cowl panel.
5. Tighten screws (2) to 1.8 Nm (16 in. lbs.) torque.
6. Install left front cowl trim panel.




7. Engage hood release cable into clips (5) along inner frame rail.
8. Install hood latchInstallation.