Removal

REMOVAL

1. Position the column tilt at the full-upward position.
2. Remove the steering column opening cover Steering Column Opening Cover - Removal.




3. Remove the steering column cover reinforcement mounting screws (2). Remove the steering column cover reinforcement (1).




4. Position the column tilt at the full-downward position. Leave the tilt lever (2) in the released position.
5. Remove the screws (1) attaching the lower shroud. After removing the screws, un-clip the shrouds from one another by applying hand pressure along the seams where the shrouds connect on the sides.
6. Remove the lower shroud.