Rear - 2.7L

REAR - 2.7L





WARNING: The normal operating temperature of the exhaust system is very high. Therefore, never attempt to service any part of the exhaust system until it is cooled. Special care should be taken when working near the catalytic converter. The temperature of the converter rises to a high level after a short period of engine operation time.

1. Disconnect negative battery cable.
2. Raise vehicle on hoist.
3. Remove entire exhaust system from vehicle Removal - Exhaust System
4. Remove exhaust cross-under pipe Cross Pipe - Removal.
5. Disconnect upstream oxygen sensor.
6. Remove nuts attaching converter to exhaust manifold.
7. Remove exhaust manifold heat shield.
8. Remove catalytic converter.
9. Remove and discard gasket.