FWD

FRONT-WHEEL-DRIVE

NOTE: Before proceeding, Brakes - Caution.





1. Move aside the luggage compartment carpet as necessary to access the wheel speed sensor cable connector.
2. Disconnect the wheel speed sensor cable connector (1) at the body wiring harness connector (2).
3. Raise and support the vehicle. Maintenance.




4. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly (1).




5. Remove the grommet (2) from the hole in the body (1) and pull the wheel speed sensor cable out through the hole.
6. Remove the speed sensor cable routing clip (3) from the outside frame rail.
7. Remove the screw (4) fastening the cable routing clamp (5) to the rear suspension crossmember (6).




8. Remove the speed sensor cable routing clips (4) from the trailing link.
9. Remove the screw fastening the cable routing clamp to the trailing link.




10. Remove the screw (1) fastening the wheel speed sensor (2) head in the rear of the hub and bearing. Remove the sensor from the vehicle.