Deckbar

INSTALLATION





1. At the hydraulic cylinder, insert the line end and slide the retaining clamp around the line end.




2. Attach the cylinder (1) onto the deckbar (2) and quarter panel and install fasteners.




NOTE: Make sure to close hydraulic pump valve. The pump valve will be oriented horizontally when closed.

NOTE: The hydraulic system uses ARAL VITAMOL ZH-M fluid. When replacing components or topping off system due to leak, make sure to use only approved fluid.

3. Install the spare tire cover/floor of the trunk.
4. Install the trunk side trim.
5. Install the rear trunk trim.
6. Connect the battery negative remote cable.
7. Close the decklid conventionally,