Rear View Mirror - Installation

MIRROR





1. Position and slide the rear view mirror (2) downward over the support bracket/button (1) on the inside of the windshield glass.
2. Install and tighten the set screw (3) that secures the rear view mirror to the support bracket/button. Tighten the screw to 2 Nm (17 in. lbs.).




3. If the vehicle is so equipped, route the electrochromic (automatic dimming) mirror takeout and connector (1) and/or the telematic (hands-free phone) mirror takeout and connector (2) of the headliner wire harness to the left of the mirror support bracket and reconnect it to the connector receptacle on the back (windshield side) of the mirror housing (3).
4. If the vehicle is equipped with either the electrochromic or the telematic mirror option, reconnect the battery negative cable.