Front Window Moves About 3 Inches and Quits

*FRONT WINDOW MOVES ABOUT 3 INCHES AND QUITS





NOTE: The Driver circuits are shown but the Passenger side is similar.

For a complete wiring diagram Consult Diagrams/Electrical.





Diagnostic Test

1. TEST FOR DIAGNOSTIC TROUBLE CODES
Turn the ignition on.
With the scan tool, read DTC's.
Does the scan tool display any Power Window related DTC's?

No

- Go to 2

Yes

- Diagnose and repair the DTC(s).
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

2. WINDOW HALL SENSOR A AND SENSOR B SIGNAL CIRCUIT OPEN
Disconnect the appropriate Door Module C2 connector.
Disconnect the appropriate Window Motor connector.
Measure the resistance of the Window Hall Sensor A Signal circuit between the Motor connector and the Module C2 connector.
Measure the resistance of the Window Hall Sensor B Signal circuit between the Motor connector and the Module C2 connector.
Is the resistance below 2.0 ohms on both Signal circuits?

No

- Repair the Window Hall Sensor Signal circuit(s) for opens.
- Perform BODY VERIFICATION TEST - VER 1.Body Verification Test

Yes

- Replace the Window Motor.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test