Pressure Hose - 2.7L Engine

2.7L ENGINE

NOTE: Before proceeding, Service Precautions.

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise and support the vehicle. Maintenance




3. Remove the return hose (1) at the return tube (2) and allow any fluid in the hose to drain. If equipped with a screw-clamp, be sure to save the original clamp for reinstallation.




4. Remove the pressure hose (2) at the pump (1).




5. Unscrew the tube nut (2), then remove the return hose (1) at the steering gear.
6. Unscrew the tube nut (3), then remove the pressure hose (4) at the steering gear.




7. Remove the screws (1) securing the power steering hose routing clamps (2) to the rear of the crossmember.
8. Remove the power steering pressure hose from the vehicle.