Installation

INSTALLATION

1. Install the 2/3 bow spring.
2. Remove the top prop to hold the front of the top up when the spring was removed.
3. Peel back the soft top cover forward over the first two panels.
4. Install the weatherstrips on both sides on the front header casting assembly.
5. Install the front top cover retainer Installation.
6. Install the headliner Headliner - Installation.
a. Install the screws on the sides of the top retaining the elastic straps.
b. Install j-clips to the headliner and pull the headliner forward.
c. Install the push pins on the headliner at the header.
7. Remove the header rail trim Installation
8. Close top.