Installation

INSTALLATION

1. Lay soft top cover over the top assembly.
2. Install the side rail rear weatherstrips, rear portion of the seats, on both sides.
3. Install the side rail rear weatherstrips on both sides, but only the front portion of the rear seals.
4. Overlay the soft top cover to the front and mid sections.
5. Install the side rail middle weatherstrips on both sides.
6. Install the front header bezel.
7. Install the middle side rail trim on both sides.
8. Install the front side rail trim on both sides.
9. Install headliner by connecting the remaining clips.
10. With the help of assistant, position and install the backlite glass and panel and install one screw to hold it.
11. Install the Remaining screws to the rear glass panel.
12. Stretch the headliner over the interior frame and install the screws on the sides of the top retaining the elastic straps.
13. Install the fasteners mounting the headliner to the rear glass top panel.
14. Connect the heated backlite electrical connectors.
15. Install the headliner j-clips to the top frame.
16. Install the push pins on the headliner at the header.
17. Operate top open and closed to check for binding and proper operation.