40/41TE Automatic Transaxle (GPEC)

P0218-HIGH TEMPERATURE OPERATION ACTIVATED

For a complete wiring diagram Consult Diagrams/Electrical.

Theory of Operation

The DTC is an informational code only and is being set to aid the technician in determining root cause of a customer driveability issue. The code is also intended to alert the technician to determine if a cooling system malfunction has occurred or if an additional transmission air to oil cooler should be added to the vehicle if the customer regularly drives in a manner that overheats the transmission.

- When Monitored:
Whenever the engine is running.

- Set Condition:
Immediately after an Overheat shift schedule is activated when the Transmission Oil Temperature reaches 115° C or 240° F.





Always perform the 40/41TE Pre-Diagnostic Troubleshooting procedure before proceeding. Testing and Inspection

Diagnostic Test

1. CHECK ENGINE COOLING SYSTEM
Perform Engine Cooling System diagnostics.
Is the Engine Cooling System functioning properly?

Yes

- Go to 2

No

- Repair the cause of the engine overheating.
- Perform 40/41TE VERIFICATION TEST 40/41TE Transmission Verification Test

2. TRANSMISSION OIL COOLER RESTRICTED
Check the Transmission Oil Cooler Flow.
Is the transmission oil cooler restricted or plugged?

Yes

- Repair the cause of the plugged Transmission Oil Cooler as necessary and repair or replace the Transmission Oil Cooler.
- Perform 40/41TE VERIFICATION TEST 40/41TE Transmission Verification Test

No

- Go to 3

3. HIGH TEMPERATURE OPERATION
This DTC is an informational DTC designed to aid the Technician in diagnosing shift quality complaints.
This DTC indicates that the transmission has been operating in an Overheat shift schedule which may generate a customer complaint.
The customer driving patterns may indicate the need for an additional transmission oil cooler.
With the scan tool, check the DTC EVENT DATA to help identify the conditions in which the DTC was set.
Check for any Service Bulletins that may apply.
If there are no possible causes remaining, view repair.

Repair

- Repair the cause of transmission overheating.
- Perform 40/41TE VERIFICATION TEST 40/41TE Transmission Verification Test