B1A23

B1A23-RKE RECEIVER PERFORMANCE - WCM

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Continuously.

- Set Condition:
When the Wireless Control Module senses that the RKE signal is jammed, this code will set.





Diagnostic Test

1. TEST FOR INTERMITTENT CONDITION
Turn the ignition on.
With the scan tool, record and erase DTC's
Turn the ignition off.
Operate the RKE transmitter in all positions several times.
Turn the ignition on.
With the scan tool, read DTC's.
Are there any door lock related trouble codes present or is the RKE inoperative?

Yes

- Refer to appropriate testing.

No

- The conditions that caused this code to set are not present at this time. This DTC is set when the vehicle is parked in a location that is affected by external environmental conditions. Suggest to the customer that they park in a slightly different location from where the RKE was inoperable.