Spark Plug - Removal

2.0, 2.4L





NOTE: Prior to removing coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube.

1. Disconnect the negative battery cable.
2. Disconnect the electrical connectors from ignition coils.




3. Remove the ignition coil mounting bolt.




4. Twist the ignition coil then pull straight up.




NOTE: Prior to loosening the spark plug, use compressed air to blow out any debris that might be in the spark plug tube.

5. Remove the spark plug using a quality socket with a rubber or foam insert.
6. Inspect the spark plug condition.