Panel To Panel Latch Assembly - Installation

INSTALLATION

NOTE: The left and right latch assemblies are identically mounted except for a micro switch on the left rear or lower latch to rear panel.

1. Position the latch assembly into position and install the six bolts to the latch assembly - three at each latch mechanism.
2. Left side only - connect the micro switch at the rear/lower latch.
3. Connect the cable end at the latch at the front of the mid panel.
4. Clip on the horizontal rod that is attached to the center pivot assembly (with the hydraulic cylinder on it).
5. Install the mid panel headliner Headliner - Installation.