2nd Row

INSTALLATION





1. Install the rear heated switches (2) into the back of the rear floor console switch bezel (1) as required. Make sure that the switch retaining tabs are fully engaged to the bezel.




2. Connect the wire harness connectors (4) to the rear heated seat switches (3).
3. Install the rear floor console switch bezel (1) into the rear floor console (6) by pushing it in through the front surface of the console. Make sure that the bezel retaining tabs are fully engaged to the console.
4. Install the rear floor console Floor Console - Installation.
5. Connect the battery negative cable.
6. Verify 2nd row heated seat system operation.