Front Lamp Unit - Installation

FRONT LAMP UNIT





CAUTION: Do not touch the glass of HID or halogen bulbs with fingers or other possibly oily surface. Reduced lamp life will result.

1. Transfer the lamps to the new front lamp unit (3) if replacing unit.
2. Connect the front lamp unit electrical connector (2).




3. Gently place the front lamp unit into the body opening. Make sure the lower retaining clip (3) is placed on the retaining bar on the bottom of the front lamp unit (2). Be careful not to damage lower retaining clip upon installation.
4. Install the two front lamp unit retaining screws (1).
5. Connect the battery negative cable.
6. Close hood.