Front Timing Belt Cover

INSTALLATION

NOTE: The timing cover bolts and both holes to the engine block must be thoroughly cleaned and free of oil residue before assembly. IN ADDITION add thread sealant to the timing cover bolts that mount to the oil pump Engine Oil Pump - Installation

1. Install front timing belt cover.
2. Install the upper engine mount Upper Engine Mount.
3. Connect fuel supply line at fuel rail.
4. Install the air cleaner housing Air Cleaner Housing - Installation.
5. Remove floor jack and raise vehicle.
6. Install power steering pump fasteners. Tighten bolts to 23 Nm (200 lbs. in.).
7. Install crankshaft damper Vibration Damper - Installation.
8. Install accessory drive belt tensioner. Torque fastener to 28 Nm (250 in. lbs.).
9. Install accessory drive belt Accessory Drive Belt - Installation.
10. Lower vehicle.
11. Connect negative battery cable.