Driver

REMOVAL





1. Remove the drivers seat from the vehicle and place it on a clean work surfaceSeat - Removal.
2. Remove the Memory Heated Seat Adjustable Pedal Module (MHSAPM) retaining screws.
3. Disconnect the module electrical connectors and remove the module from the power seat track (6).
4. Remove the rear fabric blocker trim panel from the rear of the front seat.
5. Remove the seat side cover assemblies. Front Seat Shields - Removal Removal Removal.
6. Disconnect all electrical connectors connecting the power seat track (6) to the seat cushion frame (4).
7. Pull the seat back trim cover up slightly to access and remove the two seat back frame (1) mounting bolts and also remove two seat back recliner (3) bolts.
8. Remove four seat track mounting bolts from the seat cushion pan.
9. Remove the power seat track from the seat.