Removal

REMOVAL

NOTE: The liftgate does not have an outside mechanical release. For any service procedures that require disconnecting battery, open liftgate, if necessary before disconnecting battery.

1. Release liftgate latch and open liftgate.
2. Disconnect and isolate the battery negative cable.
3. Remove upper header trim panel. Removal.
4. Disconnect liftgate wiring and hoses.
5. Support liftgate on a suitable lifting device.
6. Disconnect power liftgate link from liftgate.
7. Disconnect prop rods from liftgate. Removal.
8. Remove bolts attaching liftgate hinge to liftgate. Removal.
9. With assistance, remove liftgate from vehicle.