Installation

INSTALLATION





1. Position the power liftgate control module (3) into the vehicle.
2. Insert the mounting tab into the locating slot on the quarter panel (1).
3. Install the power liftgate control module (3) retaining screw (4).
4. Connect the wire harness connectors (5) to the power liftgate control module (3).
5. Install the left quarter trim panel, Console Shifter Bezel - Installation.
6. Connect the battery negative cable.
7. Using an appropriate scan tool, check and erase any power liftgate control module diagnostic trouble codes.
8. Perform the power liftgate learn cycle, Power Liftgate Learn Cycle.
9. Verify power liftgate system operation.