Radio, Stereo, and Compact Disc: Description and Operation

DESCRIPTION

An audio system is standard equipment. A rear seat video system is an available option. Two radio receivers are offered. The audio/video system uses an ignition switched source of battery current so that the system will only operate when the ignition switch is in the RUN or ACCESSORY/ACCESSORY DELAY positions.

The audio/video system includes the following components:

- Amplifier (If equipped)
- Antenna - Combination satellite and radio. Removal for removal.
- Antenna integral to the right quarter glass
- CD/DVD changer (if equipped)
- Radio noise suppression components
- Radio receiver
- Speakers
- Video screen (if equipped)

Certain functions and features of the audio/video system rely upon resources shared with other electronic modules in the vehicle over the Programmable Communication Interface (PCI) bus network. The data bus network allows the sharing of sensor information. For diagnosis of these electronic modules or of the data bus network, the use of a scan tool and the proper Diagnostic Procedures manual are recommended.

For complete circuit diagrams, refer to Diagrams/Electrical.