VTSS Verification Test

VTSS VERIFICATION TEST - 1A

Diagnostic Test

1. Perform VTSS Verification Test
Ensure all doors and the liftgate are closed.
Open the driver door.
Remove the ignition key (but keep in hand).
Lock the doors with RKE transmitter.
Close the driver door.
If the VTSS Indicator Lamp flashes rapidly and after approximately 15 seconds changes to a slower flash, the system is operational.
If the Indicator fails to flash as described, there is a problem with the system.
With the scan tool, select ECU View.
Check for DTCs in the modules.
Are any DTC's present or is the original complaint still present?

Yes

- The repair is not complete. Diagnose and repair the DTC(s).

No

- The repair is complete.