U1414

U1414-IMPLAUSIBLE/MISSING ECU CONFIGURATION DATA

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on. The ORC on board diagnostics continuously monitors the CAN Bus message from the FCM containing the ORC Configuration Data.

- Set Condition:
This DTC will set if the appropriate CAN Bus message is not received by the ORC.





Diagnostic Test

1. FRONT CONTROL MODULE FAILURE
Turn the ignition on.
With the scan tool, read FCM DTCs.
Does the scan tool display any Front Control Module DTCs?

Yes

- Diagnose and repair the DTC(s). Repair all FCM active DTCs before diagnosing the ORC DTCs.

No

- Replace the Front Control Module.
- PERFORM *ORC VERIFICATION TEST - VER 1. Occupant Restraint Controller (ORC) Verification Test