DDM-53

DDM-53-REPLACE MODULE

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
At all times.

- Set Condition:
Anytime the module has sensed that the output has been shorted to ground for over 125 ms., this code will set. This code cannot be cleared.





Diagnostic Test

1. DRIVER DOOR MODULE
Whenever this code has set, the module must be replaced.
When this code is set, view repair.

Repair

- Replace the Driver Door Module.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.