CD Changer Read Failure

CD CHANGER READ FAILURE

For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
Continuously with the ignition and CD Changer turned on.

- Set Condition:
The code will set if a CD that is not formatted as a music CD is installed in the CD Changer.





Diagnostic Test

1. CD CHANGER READ FAILURE
Replace the problem CD with a good, clean, unscratched, music CD.
Turn the radio on and select the good CD.
With the scan tool, read DTC's.
Does the scan tool display CD CHANGER READ FAILURE?

Yes

- Replace the CD Changer.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.

No

- Test complete.