CD Changer Mechanical Failure

CD CHANGER MECHANICAL FAILURE

For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
Continuously with the ignition and CD Changer turned on.

- Set Condition:
The code will set if the CD Changer detects a mechanical failure.





Diagnostic Test

1. INTERNAL FAILURE

NOTE: Erase DTC and attempt to reset. If DTC resets, follow this test.

This is an internal CD Changer failure.
View repair

Repair

- Replace the CD Changer.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.