Connecting Rod, Engine
CONNECTING RODS
CONNECTING ROD TORQUE
Install connecting rod bolts and tighten to 7 Nm (5 ft. lbs) initially. Tighten the bolts an additional 21 Nm (15 ft. lbs.) and then turn each bolt 90° to final clamping load.
CONNECTING ROD TORQUE
Install connecting rod bolts and tighten to 7 Nm (5 ft. lbs) initially. Tighten the bolts an additional 21 Nm (15 ft. lbs.) and then turn each bolt 90° to final clamping load.