Fog Lamp Bulb - Installation

FOG LAMP BULB





CAUTION: Do not touch the glass of the bulbs with fingers or other possibly oily surface. Reduced lamp life will result.

1. Place the fog lamp bulb into the fog lamp unit and twist the fog lamp 1/4 turn clockwise until it hits its stop.
2. Connect the fog lamp electrical connector (2).

NOTE: On the PASSENGER SIDE, if it was necessary to loosen the lower portion of the inner splash shield to gain access to the fog lamp bulb, then the splash shield will have to be reinstalled Front Wheelhouse Splash Shield - Installation

3. Connect the battery negative cable.
4. Close hood.