Right

REMOVAL





1. Disconnect battery negative cable.
2. Raise and support the vehicle.
3. Separate the exhaust pipe at the rear exhaust manifold.
4. Remove bolts (2) fastening crossover pipe (1) to exhaust manifold.
5. Lower the vehicle.




6. Remove the air cleaner housing.
7. Disconnect the TPS (3), IAC (2), ETC, and purge vacuum hose from the throttle body.
8. Disconnect the upstream oxygen sensor (5).
9. Disconnect the spark plug wires at the spark plugs.
10. Remove heat shield fasteners, and remove shields.
11. Remove bolts attaching exhaust manifold to cylinder head and remove manifold.
12. Inspect and clean manifold. Exhaust Manifold - Cleaning Exhaust Manifold - Inspection.