FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Seals and Gaskets >> Service and Repair >> Input Shaft Seal >> Installation

Installation







INSTALLATION





1. Use Special Tool 9123 Drift (1) and a mallet to drive in the new seal (2).
2. Install the clutch release bearing/slave cylinder. Installation.
3. Install the transmission in the vehicle. Manual Transmission/Transaxle - Installation.
pro multis Credits:Operation CHARM About Operation CHARM