Left

LEFT SIDE





1. Position the manifold (1) and gaskets (2) on the cylinder head. Install the manifold nuts (3) and tighten to 35 Nm (26 ft. lbs.).
2. Install the left side catalytic converter Catalytic Converter - Installation.




3. Install the lower splash shield and screws (1). Tighten to 5 Nm (44 in. lbs).
4. Lower the vehicle.
5. Install the air cleaner Air Cleaner Housing - Removal.
6. Connect the negative battery cable.
7. Start the engine and check for exhaust leaks.