Water Pump - Removal

REMOVAL





1. Disconnect the negative battery cable.
2. Drain the cooling system. Service and Repair.
3. Remove the air cleaner inlet tubes (2).
4. Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.




5. Remove the radiator fan. Radiator Fan - Removal.




6. Remove the accessory drive belt. Accessory Drive Belt - Removal.




7. Remove the belt tensioner. Accessory Drive Belt Tensioner - Removal.




8. Disconnect the lower radiator hose (2).
9. Disconnect the coolant by-pass hose (1).
10. Remove the generator. Generator - Removal.




11. Remove the water pump pulley (2).
12. Remove the accessory drive belt idler pulley (1).
13. Remove the water pump retaining bolts and the water pump.