Flap Hinge

FLAP HINGE





NOTE: Hydraulic pressure in the convertible top system may deplete after 10 minutes. To prevent the top from lowering, press the convertible top switch momentarily after the system beeps. This will re-energize the hydraulic system.

1. Remove the flap outer cover. Removal.
2. Remove the flap inner cover. Removal.
3. Remove the flap seal. Removal.
4. Remove the top left bolt (1) and the cable cover (2).
5. Disconnect the cable (3) from the pivot (4) by pushing down on the flap and rotating the cable until the cable lines up with the keyhole.




NOTE: Count the number of ridges visible before removing the retaining clip in order to minimize adjustment when re-attaching the cable.

6. Remove the clip (1) and separate the cable (3) from the hinge (2).




7. Remove the bolts (1) and the flap hinge (2).