Main Bow Cylinder

MAIN BOW CYLINDER

NOTE: If the hydraulic lines are being replaced, they must only be replaced as a pair.

NOTE: Left side procedure is described; right side is similar.

NOTE: Be sure to install the lines exactly as they were removed.

1. Position the hydraulic lines and secure them as necessary.
2. Connect the hydraulic lines to the left main bow cylinder and the power top hydraulic assembly Convertible Top - Standard Procedure.
3. Manually close the rear bow and the tonneau cover Convertible Top - Standard Procedure.
4. Install the left side trunk trim.
5. Connect the negative battery cable.
6. Operate the convertible top and check for correct operation.