OCM Internal- Memory Overflow

B1105- OCCUPANT CLASSIFICATION MODULE INTERNAL- MEMORY OVERFLOW - OCM

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on.

- Set Condition:
This DTC will set if the module identifies more data written then allotted.





Diagnostic Test

1. CHECK FOR ACTIVE DTC
Turn the ignition on.
With the scan tool, read OCM DTCs.
Does the scan tool display this DTC as active?

Yes

- Replace the Passenger Seat Assembly.
- Perform *AIRBAG VERIFICATION TEST. Airbag System Verification Test

No

- Go to 2

2. VERIFY STORED CODE
With the scan tool, erase all OCM DTCs.
Cycle the ignition off, then back on.
With the scan tool, read OCM DTCs.
Does the scan tool display this DTC as stored?

Repair

- Replace the Passenger Seat Assembly.
- Perform *AIRBAG VERIFICATION TEST. Airbag System Verification Test