Removal

REMOVAL




1. Remove the shifter.
2. Raise hood.
3. Remove the resonator.
4. Remove engine cover.
5. Remove air cleaner assembly.
6. Disconnect negative battery cable.
7. Disconnect cables (1) from the shift levers at the transaxle.

CAUTION: Pry up with equal force on both sides of shifter cable isolator bushings to avoid damaging cable isolator bushings or damaging levers.




8. Remove cable retaining clips and remove cables (1) from bracket (5).
9. Remove cables at shifter.
10. Remove the Occupant Restraint Controller (ORC).
11. Remove rubber grommet (4) at floor pan.
12. Remove cable assembly (1) from vehicle.